Society of Automobile Engineers SAE Testing

Today, Contract Laboratory .com received a request from an automotive parts manufacturer needing us to find them a laboratory to perform SAE Insulation Testing of a car part. SAE is an international organization which stands for  Society of Automobile Engineers. SAE International is a global organizations that advances self-propelled vehicle and system knowledge. In all, the Society of Automobile Engineers SAE has over  10,000 standards in the aerospace, automotive and commercial-vehicle industries.

Society of Automotive Engineers SAE testing
Society of Automotive Engineers SAE testing

SAE International develops voluntary consensus standards. In the request that Contract Laboratory .com received, the company needed a laboratory to perform SAE Testing to SAEJ2302 – Thermal Effectiveness of Sleeve Insulation.

Other examples of how Contract Laboratory .com facilitated the Society of Automobile Engineers SAE Testing  for automotive manufacturers, distributors, retailers and others corporations including:

  • Physical Laboratories needed for Insulation Testing to SAEJ2302 – Thermal Effectiveness of Sleeve Insulation
  • URGENT Europe laboratory needed for mechanical SAE Testing of hoses for refrigerant against SAE J2064:2012 standard
  • USA mechanical laboratory needed for SAE basic fuel filter testing as outlined in SAEj905. I would like to test multiple filters for resistance to flow and filter capacity and contamination removal characteristics
  • Mechanical Laboratory needed: Compression stress relaxation 1008hrs aging in air at 150°C. SAE J2979, Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Compressive Stress Relaxation (CSR)
  • Mechanical Laboratory needed for SAE testing on truck/trailer cable to SAE J560 and SAE J2394 SAE J844 and SAE J1131. This is the coil cords you see between a semi truck and the trailer it pulls. Need testing for both the electrical cord and the air hoses for brakes.
  • Engineering Laboratory needed for SAE Testing: SAE Testing to SAE J2297 (Leak Detection Dye Test)
  • Contract Laboratory needed for SAE Testing: Run the entire SAE J2297 (A/C Leak Detection Dye) program. Our company manufactures a Fluorescent dye that we would like to have certified to the SAE J2297 standard.
  • Analytical Chemistry Laboratory needed for SAE Testing to SAE J2297 (Leak Detection Dye Test)
  • USA chemistry laboratory needed for SAE Testing Refrigerant R 134a Leak Detection Dye to be tested to meet SAE J2997Specification
  • Silicone hose manufacturer needed for raw material testing to SAE J2979.
  • Electronics Laboratory needed for SAE Testing to SAE J575, SAE J579, SAE J1330, vibration test, moisture test, dust test, corrotion test, warpage test for plastic components, photometry, flash rate, color test,high temperature flash rate test, low temperature flash rate test, durability flash rate test
  • Northeast USA engineering laboratory needed for SAE Testing to Marine SAE J1171, External Ignition Protection of Marine Electrical Devices. for brushless alternator Alternators that are being installed on inboard gasoline engines must be certified to meet Coast Guard requirements for ignition prote

If your company needs a laboratory to perform Society of Automotive Engineers SAE Testing, simply Submit a SAE Laboratory Test Request or give our Laboratory Assistance Team Toll-Free at 1-855-377-6821

To view the Society of Automotive Engineers SAE Standards visit the SAE Website with a list of the SAE Standards by categories.

Republished by Blog Post Promoter